86 05926252889
allie@hqmount.com
Photovoltaic power station must strengthen the foundation, PV bracket, and at the same time to ensure the module border strength. While weighing the cost of photovoltaic power station and power generation revenue, it is necessary to improve the performance of the module back plate, border materials, encapsulated glass impact resistance, seismic performance, etc., the installed PV modules and the solar project under construction to carry out a comprehensive inspection, which includes screws of the fasteners, fasteners adjustments, and the damaged fasteners to be replaced immediately. Also to improve the strength of photovoltaic brackets, component pressure block design requirements, photovoltaic power station wind resistance is determined by the vast majority of photovoltaic bracket, photovoltaic bracket retrofitting fastening windproof tie rod, in order to prevent the solar bracket with the wind twisting, will be strung on both sides of the cut through the rock anchor tamping treatment, tighten all the bolts of the whole field.
2, to ensure that the photovoltaic project relies on the quality of the building
Rooftop photovoltaic power station in the design of the main consideration of the support capacity and the prevention of seismic risk, to prevent the roof photovoltaic module is blown away by the wind danger. Photovoltaic modules are generally required to be retrofitted on concrete roofs, and when the load of the colour steel tile roof does not meet the load-bearing requirements of the photovoltaic system, it must be reinforced in accordance with the correct scheme.
3、Improve the design and installation quality of PV
Be sure to choose HQ Mount such a reliable and experienced PV mounting supplier, Xiamen HQ Mount from product standards, design standards, installation standards, implementation requirements and other aspects of solar mounting quality control.
